The XP2 20A ESC is part of Overlander’s range of ready-to-fly (RTF) speed controllers, which have been specifically designed to work in conjunction with our Tornado Thumper motors. They are prgrammed for an easy plug and play set up; prameters can be altered easily through our XP2 program card or by your transmitter.
|Full protection feature including low voltage, over-heat, throttle signal lost, start-up protection and self-check.|
|Excellent start-up performance, great throttle linear and quick throttle response.|
|They are able to support high motor speeds of 210,000RPM (2 poles), 70,000RPM (6 poles) and 35,000 (12 poles).|
|Easy configured to suit your exact set up and preferences using the XP2 program card.|
|System can automatically detect throttle neutral point.|
|Three timing modes can match different motors.|
|Three modes of start force adjustment.|
|Governor mode for heli.|
|Reverse motor direction.|
|LiPo Voltage Range||2 – 3S|
|NiMH Voltage Range||5 – 9S|
|Red & Black Wire Gauge||18AWG|
|Motor Wire Gauge||18AWG|
|Connectors to Motor||3.5mm Gold|
|Connectors to Battery||Deans|
PLEASE NOTE: our XP2 range of speed controllers are mainly designed for use in model aircrafts and therefore although they can be programmed to go in reverse the user cannot switch between the two directions (forwards and reverse) whilst the ESC is in operation. For use in a boat the option to quickly switch between directions is often required so for this it’s recommended a proper marine ESC is purchased.
TOP TIP: Manufacturers recommend servo numbers to be limited to 1 servo per 1A of BEC. At Overlander we suggest you consider a separate receiver battery pack or updated UBEC when using 4 servos or more.
Submit your review